top of page

Barrier and access control system Kit №1

For parking lots, garages, offices and areas with collective use.

UHF10 Pro Series UHF RFID Readers 2 pcs

Hikvision DS-K2601 Controller 1pc

LED traffic light CAME 2-section red-green 24 V 2pc

Barrier FAAC B680 H 1pc

All components are installed only by our specialists. Installation and delivery services are included in the price.

 

UHF10 Pro Series UHF RFID Readers 2 pcs

ZKTeco's third-generation UHF readers, with much stable performance, longer reading distance, and faster recognition speed. The UHF reader is equipped with the passive UHF card function, which could be widely used in Vehicle Management and Personnel Management applications. The product also meets the CE, FCC technology requirements. Features: reading distance 10-20m; different Wiegand data output (Wiegand 26 by default); two working mode: trigger read & always read (default); LED at the bottom of readers indicating the reading status; weatherproof (IP66).

  • Read range 10-20 meters
  • Support two working modes: Trigger to Read & Always Read (Default)
  • Support different Wiegand data output (Wiegand 26 by default)
  • LED at the bottom of readers indicating the reading status (7-color indicators: red, green, blue, yellow, cyan, purple, white)
  • Multiple communication modes, supporting Wiegand and RS485
  • Protection level of IP66

Hikvision DS-K2601 Controller 1pc
2600T is an upgraded version of 2600. Although the appearance and structure of 2600T and 2600 series are the same, the firmware of 2600T series cannot be upgraded on the existing 2600 series (DS-K2601\2602\2604), and they are incompatible.

Features:

32-bit high-function processor
Record and store card numbers up to 20 characters
Support 100,000 valid cards, 300,000 event records
Support multiple cards
TCP/IP for PC communication
Wiegand and RS-485 for reader communication
Door closing time exceeding alarm, burglar alarm, forced alarm, sabotage alarm
Support ISAPI protocol
Support ehome5.0
Support OSDP protocol (support DS-K1107 / 1108 card reader supports OSDP protocol)
Support summer time setting

LED traffic light CAME 2-section red-green 24 V 2pc

Power supply 24 Vdc, 2x 125 mA
Lens diameter Ø120 mm
Dimensions 410x290x180 mm (hxbxd)
Mounting foot dimensions 70x100 mm (hxb)
Mounting foot holes h.o.h. 50x80 mm
LED type printed circuit board with 25 LEDs
Housing aluminium
Support polyamide
Protection degree IP65

Barrier FAAC B680 H 1pc

Automatic barriers FAAC. Complete set of hybrid universal barrier FAAC B680 H with elliptical composite boom 85x95 mm, 8300 mm long, barrier casing B680 H red RAL3020, boom mount, boom connector type L, reflective stickers on the boom and mounting base. Passage width up to 8000 mm.

Hybrid technology: hydraulic transmission and brushless motor.
Barrier with springs with an "infinite" service life: more than 2,000,000 cycles of continuous use without the need for extraordinary repairs.
The highest optimization of operating modes: a single barrier model and only two springs for composite booms from 2 to 8 m long, right-hand or left-hand configuration.
Designed for different operating speeds.
Removable pedestal (casing): 4 paint finishes or stainless steel.
High-speed operation (electronic adjustment): from 1.5 seconds for 2 m passages to 6 seconds for 8 m passages.
Easily programmable board made using new technology: built-in encoder (with change of direction of movement upon detection of an obstacle), two built-in loop detectors, different operating modes and Master/Slave control (paired barriers).
Traffic light signal lamp, built-in LED vandal-proof lamp and LED lamp for the boom (accessories).
Compatible with mounting plate 620 and 640 (Retrofit).
Complete set of the FAAC B680 H automatic barrier cabinet:

FAAC B680 H automatic barrier cabinet
hydraulic transmission system complete with balancing springs
mounting accessories
triangular key for unlocking the drive
See the characteristics of the FAAC B680 H automatic barrier in the Characteristics section

Technical characteristics of the E680 control board of the FAAC B680 H automatic barrier

Power supply voltage....  240 V - 50 (60) Hz
Power consumption in standby mode....  7 W
Max. drive power.... 240 W
Power supply of accessories.... =24 V
Max. current consumption of accessories.... 800 mA
Range of operating temperatures.... -20 ° C to +55°C
Fuses... 4 self-resetting
Operating modes. Automatic, Automatic 1, Semi-automatic, Parking, Parking + automatic,
Apartment building, Apartment building + Automatic, Operator presence, Remote, Personalized
Operating time....Programmable (from 0 to 4.1 min)
Automatic closing time.... Programmable (from 0 to 4.1 min)
Driver traction force....Programmable, 50 levels
Driver speed.... Programmable, 50 levels
Inputs on terminal block.... Loop 1, Loop 2, Open, Close, Safety devices when closing, Stop, Alarm devices, Power supply = 36 V, Battery XBAT, BUS 2-Easy
Inputs Connectors .... Encoder, boom protection sensor, integrated traffic light warning light, USB (for firmware update)
Terminal block outputs ....24VDC warning light, brushless motor, 24VDC accessory power supply, 4 programmable outputs, one of which is a relay
Connector .... 5-pin connector for Minidec board, decoder, RP/RP2 radio receiver, communication extension
(Net-Com, G-Com, etc.)
Programming tool ....3 buttons (+, -, F) and display, 1 auto-setup button
Programmable functions ....Operating mode, automatic closing time, opening and closing traction force, opening and closing speed, loops 1 and 2, warning light pre-on, operating time, obstacle detection sensitivity, cycle counter for maintenance, output Indicator lamps, Fail-safe output (photocell test), Status indicator output, Maintenance request, Boom light output
Programmable outputs .... 4 outputs, programmable for 18 different functions
Built-in detection sensor with loop configuration, 2 independent receiving channels - Automatic adjustment in real time, sensitivity

Barrier and access control system Kit №1

SKU: 1010
€0.00Price
Quantity
    bottom of page